【Product Specification】
Port Type: SC/APC
Color: Green
Insertion Loss: Return Loss: >50dB
Pulling Tension: 20N
Operature Temperature : -40℃~75℃
Package List：100pcs/Pack

【Installation Preparation】
1. Remove the dust cap and put the optical cable through the cap.
2. Strip off the coating of cable and retain 50 mm fiber with coating layer.
3. Fix 21-25mm fiber with coating by the fixed-length cutting instrument, then cut off the fiber which is out of the length fixing instrument.
4. Clean the residual fiber by dust free cloth with alcohol.

【Cold Connecting Process】
5. Cut the bare fiber by optical fiber cutter, retain 10 mm bare fiber.
6. Put the bear fiber through the rear of the connector and make the fiber a little bending.
7. Clamp the fiber with the tail cover and screw the dustl cap.
8. Shift up switch bottom block to the top , clamp and lock the bare fiber.
9. Install the SC Housing and done

【Tools for installation】
1. Length Fixing Instrument
2. Cover Wire Strip Clamp
3. Dust-free cloth& Alcohol
4. Wire Stripper
5. Optical Fiber Cutter