Yankok [Pro3000 Analog Tone Generator and Probe Kit] for Identifying and Tracing Cables and Wires with 3.5mm Jack Filter Out Unwanted Noise (Come with Basic Headphones)

✅The big draw for the Yankok Tone and Probe Kit is its ability to filter. For the communication installations, it functions beautifully. Whether it's because your hearing isn't what it used to be, you work around challenging cable bundles, or you're just trying to make the job easier, this kit is highly recommended for cable and wire identification.
✅With a traditional tone and probe set, any live wires send a signal that the probe can pick up. While the toner sends a clearly different signal from all that, the additional noise can make it difficult to identify which wire actually has the tone in it.
✅This kit filters out the extra noise to make it easier to identify or trace your line amongst others. Here in the US, you will usually on a 60Hz system, so this kit is set to filter out that frequency.
✅When you turn the probe on, a green light lets you know that the filter is also on. If you don't want to use, press the button and it turns red to let you know it's off. It's that simple. Pro Tip: The LED doesn't light up and the volume decreased when your battery is close to dead.
🎁What's in this package? This kit come with 1x Tone and Probe Kit, 1x Use Manual, 1x Nylon Carry Case and 1x Basic 3.5mm Jack Headphones. Powered by one 9V battery (which in not included). When you don't want or need to use headphones, the built-in speaker is plenty loud enough for general identification.

Hello,