Details:
1, This wire harness provides a connection for one set of RCA cables to provide an audio signal to an external amplifier, as well as an add-a-circuit with remote wire for the remote amplifier turn on wire.
2, This wire, along with a set of RCA cables, is run to your aftermarket amplifier. All that's left for you to do is connect the main power wire from your battery (Not included) and ground.
3, Audio volume to the amplifier can be adjusted by the dials on the harness. For easier access we recommend using an external volume knob.
4, It is up to the installer to select which circuit to use with the Add-A-Circuit. The radio circuit is most common however any that turns on/off with the ignition could be used if deemed appropriate.
5, A variety of wire colors may be used for the remote wire coming off the harness. Regardless of color, rest assured it is for the remote turn on of an amplifier.
6, Used to add an amp or sub to your factory system. One complete piece, no need to tape wires together. Comes with an inline converter. Fully adjustable gain control. Plug and play feature.

Easy to Install:
1, Remove your original factory radio
2, Unplug the original factory wiring and plug in this wire harness
3, Reinstall your original factory radio

Fitment:
Compatible with these models (partial models, not all):
For Ford Edge 2015-2018
For Ford Escape (with 4.2" screen) 2013-2020
For Ford Explorer (with 4.2-inch screen) 2011-2020
For Ford F-150 2015-2020
For Ford F-250/350/450/550 2017-2020
For Ford Fiesta 2014-2020
For Ford Focus (with 4.2-inch screen) 2015-2020
For Ford Fusion 2013-2020
For Ford Mustang 2015-2020
For Ford Transit 2015-2020

Package Included:
1 x Wire Harness
1 x Add-A-Circuit Fuse Tap
1 x 3 Amp Fuse
Show As The Picture
Installation Instruction Not Included.