Search

Search

12.6V Charger 3A Lithium Battery Charger AC DC 3S 12V 11.1V 10.8V for 3s10p Lithium ion Battery Drill Cordless Power

KWD 8
– 1 +

Special Features

  • Input: AC 100-240V 50/60Hz. Output: DC12.6V 3A. Inner Positive(+), Outer Negative(-).
  • Charger Protection: short circuit, over load, over-current.
  • 105℃ Output capacitor, global applicable AC Input voltage.100% full load aging test, Internal EMI filter, ripple minimum.The precision current between ±0.1A, the voltage tolerance is ±0.1V, absolutely not virtual marking.
  • LED: red light -- charging, green light -- charge OK, it stop automatically when the battery is full.
  • Dual IC chip SMD motherboard solutions.
  • The charger keep dry and ventilated environment, avoid hot and humid.
  • 12.6V Charger Output 3A Adapter DC 3Series 12V 11.1V 10.8V Lithium Battery Pack Charger, For 11.1V 12V three series of polymer lithium batteries.
  • The one Lithium battery is normally 4.2 volts max, so 3S boards * 4.2volts = 12.6 volts. That way you can't overcharge the batteries as long as they are rated correctly. Make sure you have the correct female power connector for this: 5.5 x 2.1 mm plug
  • To make your batteries last 10X longer, avoid using batteries below 35% and don't charge above 85-90%

Description

To make your batteries last 10X longer, avoid using batteries below 35% and don't charge above 85-90%
Input: 100-240V AC 50/60Hz
Output: DC 12.6V 3A(3000mA)
DC connector: 5.5mm x 2.1mm
Polarity: (in)positive and (out)negative
Dimensions: 120(L) x 55(W) x 35(H)mm
The output voltage adjustment rate: 5%
Output Ripple & noise: Operating temperature: 0℃ to +50℃
Storage temperature: -20℃ to +80℃
package :
1 X 12.6V 3A Power Charger
1 X US Power Cord
Warning:
Before you place order ,Please check if the AC plug, DC connector and value match with your devices or not, please refer to the details in the listing.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}