PyleHome Model : PCA3
Stereo Power Amplifier, 2 x 75 WattStereo Power Speaker Amplifier - Compact Audio Control Amp System, RCA Input, 150-Watt MAXRCA Jack Input
2 x 75 Watt MAX Power
Push Type Speaker Outputs
Blue LED Output Level Display
Power On/Off Switch and LED Indicator
Treble, Bass and Master Volume Controls
Compatible With Audio/Computerize Devices (MP3 Players) Via 3.5mm To RCA Converter
Dimensions: 7.48''W x 2.87''H x 5.39''D

This mini stereo power amplifier provides up to 75 W of power on each channel at 4 ohms. Connect your inputs using the RCA jacks. Outputs over standard speaker push jacks. It's compatible with any audio or computer device - you can even hook up an iPod using a 3.5mm to RCA jack converter. Treble, bass, and volume controls on the front let you tweak your sound to exactly how you want it. Runs on 110 or 220 V.
Front View
Connection Diagram
Stereo Power Amplifier
Back View

The Ultimate Stereo Power AmplifierThis amplifier gives you the power and versatility you need to create a professional sound system. Its wide frequency response makes it suitable for amplifying any type of audio including music or vocals. It can be used in meeting halls, restaurants, schools, stores, and at home --the perfect solution for paging systems anywhere. Get the power you need with 2 x 75 Watt to handle all your audio needs.
110/220 Voltage SelectorThis amplifier has selectable input voltage from 110 V/60 Hz (the standard in USA and Canada) to 220 V/50 Hz (for European operation). Please make sure the switch is in the proper position before operating.
CompatibilityCompatible with CD players, walkmans, and computerized devices, including MP3s, via 3.5 millimeter to RCA converter.
RCA L/R Line InputLets you connect the desired line input source.
Take ControlUse the control center panel located on the face of the unit to make adjustments to microphone volume, master volume, balance, bass, and treble.
Push Type Speaker TerminalsLets you easily connect speaker wires directly to the amplifier.
Replaceable Power FuseThe amplifier uses a fuse for protection against surges and short circuit. If the amplifier suddenly turns off and will not turn on, check the fuse and replace it if necessary. (Replacement fuse to use: 1.5-amp, 250-volt, fast-acting 5 x 20 millimeter fuse --not included)
Additional FeaturesHarmonic Distortion: 0.3%
2 x 75 Watt RMS at 4 Ohm
Blue LED Output Level Display
Frequency Response: 20 Hz-40 kHz
Power Fuse: 1.5 A, 250V Fast-Acting (5 x 20 millimeter)
Power Requirement: 120 V AC 50 Hz/230 V AC 50 Hz
Tone Controls: Bass and Treble: +/-10dB (100 Hz/10 kHz)
Dimensions: 8.27 x 2.72 x 5.39 inch (190 x 70 x 137 millimeter)