The Ableconn ISAT-M2SR turns two M.2 SATA SSD modules into an 2.5-inch SATA III SSD drive with RAID to increase performance and redundancy. The drive metal frame and mounting holes enable you to install it like a 2.5" internal hard drive. It supports SATA based M.2 NGFF 80/60/42/30 mm SSD.
Specification
* Connector:
- 1 x SATA Data & Power (7+15 pins) Receptale
- 2 x M.2 NGFF slots (type 2280-D5-B socket on board)

* Chipset: ASMedia ASM1092R
* Data transfer rate:
- Up to 6 GBps (SATA III)
* Jumper Selection:
- 1 x jumper for RAID Mode setting
* Software:
- OS independent; No driver installation is required on Windows, Mac, and Linux.
- Provides Windows and Mac GUI to configure RAID modes and monitor RAID status.

* Convert 2x M.2 NGFF SATA based SSD to a standard 2.5" 7mm SATA drive
* Supports SATA I, SATA II, SATA III Host port.
* Support SATA hot plug and booting.
* Movable M.2 NGFF stand-off and multiple plated-holes supports type 2280, 2260, 2242 and 2230 SATA-based SSD
* Supports dual-sided SSD module 1.5mm component height on the top and bottom side
* Supports H/W RAID 0, RAID 1, SPAN (Big Drive) and PM (2Drives) Modes. Note: the SATA Host required to be Port Multiplier capable for PM Mode. The SMART function is not supported.
* Hardware Jumper and Windows & Mac software GUI configure RAID modes
* 2x LED indicators for M.2 accessing activity or device failure
* Includes 7mm height 2.5-inch drive metal frame with 8 mounting holes and 4 HDD screws
* Dimensions (LxWxH): 4 x 2.8 x 0.2 in / 100 x 70 x 7 mm
* Fully RoHS compliant.
* Made in Taiwan
Note: NVMe M.2 SSD modules can NOT work with this SATA Based Adapter.
Package Contents
* Ableconn ISAT-M2SR 2.5-inch SATA Adapter for Dual M.2 SATA SSD with RAID
* 4x drive mounting screws