The ATX 24PIN 90-degree adapter provides a convenient solution for changing the installation direction of the ATX 24-pin cable with a 90-degree L-shaped upward tilt angle adapter. Use this adapter to install the 24PIN power cord from vertical to horizontal.
The right-angle ATX 24-pin adapter no longer needs to wrap or fold the cable back and forth on the motherboard. It solves the problem that the 24-pin power cord is too long to be inserted into the ATX 24-pin cable, and prevents accidental damage to the motherboard pins by inserting the 24P cable into the motherboard.

Solve the problems of messy wiring inside the chassis, poor wiring at the bottom of the chassis, and vertical plugging of wires to block the hard disk drive.
Connector A: 24-pin male, Connector B: 24-pin female.

Note: 1. This adapter is only designed for 24-pin ports to improve the connection between the motherboard and PSU. 2. The adapter must be installed step by step to avoid pin short circuit and main board damage. 3. Please unplug the power cord and wait 10 seconds before installing.
Installation size: 52 * 18 ** 33MM (LxWxH)
Weight: 18g
Package includes: Motherboard ATX 24-pin male to 24-pin female 90 degree connector