Ideal for programmers, hardware engineers and DIY User.
Compared to other USB to TTL UART adapters, this adapter not only supports 3.3V and 5V logic levels, but also adds support for 1.8V logic levels.
At the same time it is equipped with a protective plastic case, this protective plastic case can effectively prevent static interference and various short

circuits.

Specification:
Model: SH-U09C2
Main chip: FTDI FT232RL
Pin Definition: CTS,RTS,RXD,TXD,GND,VCC
Output VCC: 1.8V/3.3V/5V
TTL Level: 1.8V/3.3V/5V
USB interface: 2.0
The maximum speed: 3Mbps

About indicator LED:
PWM LED:Power Indicator
RXD LED:The data transmission indicator flashes when there is data from the USB port.
TXD LED:The data receiving indicator flashes when the USB port receives data.

List of supported systems
1,Windows xp,7,8,10
2,Ubuntu 11.10, kernel 3.0.0-19
3,Mac OS X 10.3 to 10.8 (32 &64 bit)
4,Mac OS X 10.9 and above(64 bit)
You can download the driver directly from FTDI's website

Packing list:
1 X FTDI FT232RL USB to TTL Adapter with a plastic shell
1 X User Manual
1 X 4 PIN DuPont cable

WARRANTY:
DSD TECH offers a 1-year warranty and lifetime technical support for this USB-to-TTL adapter。If you meet any question, Please contact us, We will fix your

issue within 24 hours.

Important Notes
This product uses FTDI FT232RL chip by default, because of the chip out of stock, some production batches use FTDI FT232RNL model chip . Please do not worry, FT232RNL is also the chip produced by FTDI, can completely replace FT232RL. If you still care about these please contact us.