Product description
MMDVM Hotspot is an easy, convenient and ready to use Multi-mode Hotspot that supports C4FM YSF NXDN DSTAR P25 DMR

Base Setting:
Power On and Wait for 2-3 minutes Connect to Pi-Star-Setup(pi-star)/SSID/PASSWORD: raspberry
http://192.168.50.1/admin/configure.php

MMDVMHost Configuration
MMDVM Display Type: OLED
Radio Freq: UHF:430-440,VHF:144-146
Radio/Modem Type: STM32-DVM/MMDVM_HS – Raspberry Pi Hat(GPIO) or any XXX(GPIO)
192.168.50.1/admin/expert/edit_mmdvmhost.php
RXOFFSET=0,TXOFFSET=0 (default)
TIPS:OLED is no display Until you set wifi and display TYPE

Login info:
User:pi-star password:raspberry
Set the same Frequency, Callsign, DMR ID, Color code, Repeater Slot(Time Slot Defaults 2) as Radio Mobile and WiFi Details Software:Pi-Star
Note: All designs will be contributed on MMDVM open source project.

IMPORTANT NOTE:
When you first time set up, MMDVM hotspot will generete pi-star set up hotspot, which you'll connect with, and goes into pi-star and then visit 192.168.50.1 for configuration.
If you connected to your home network/home wifi, it will remember your home wifi. Therefore, when you open pi-star and try to update your configure, there will be no pi-star wifi.
If you came across this situation, here're two methods to log in and update you configure:
A, Visit http://pi-star on your browser, log in pi-star and configure. If you're on macOS, iOS or Windows 10 tablet, please visit http://pi-star.local.
B, Find your Device IP on your home network routers, and log in with that IP, and update your configure.

Package content:
1x OLED display (installed on board)
1x Raspberry Pi Zero W
1x TF card
1x MMDVM_HS(UHF+VHF)
1x USB Cable
1x Antenna (with 90 degree elbow)