Search

Search

Taramps DS 1200x4 2 Ohms 1200 Watts RMS 4-Channel 300x4 Watts RMS, Class D Full Range, Crossover High/Low Pass Fixed, Bridgedable, Car Audio Amplifier

KWD 76.500
Brand
Taramp's
Category
Car Electronics
Weight
2.1 kg
– 1 +

Special Features

  • The DS 1200x4 is a multi-channel amplifier. It has 4 channels of 300 Watts RMS, with a maximum power of 1200 Watts RMS, at 2 ohm and is compatible with any frequency.
  • The recommended wire gauge for Positive / negative power supply cable is 5 AWG. For Output cables wire gauge is 13 AWG. For Remote Cable is 18 AWG and for protection fuse or circuit breaker is 70A
  • Short-circuit Protection: Shutdown the amplifier when detect a short- circuit or impedance lower than the supported at the output..
  • Output Power @ 12.6 VDC: 2 Ohms: 1200 watts RMS / 4 Ohms: 768 watts RMS. The frequency response (Full Range) 9Hz ~ 27KHz (-3dB)**.
  • Input: inputs of signals to be amplified. Connect these signals to RCA outputs of Head Unit, using good quality shielded cables to avoid noise interference. Level: It sets the amplifier input sensitivity, which allows an optimal adjustment to the output signals levels of nearly all models of Head Units found in the market.

Description

The DS 1200×4 is synonymous with multichannel amplifier. It has 4 channels of 300 Watts RMS, with a maximum power of 1200 Watts RMS, at 2 ohm and is compatible with any frequency, that is to say, it is a FULL RANGE amp. Versatility, efficiency and quality in a single product.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}