Specification:
Compliant with IEEE802.3af
Isolation: 2.5kV
Power Input(RJ45 female): DC44~57V
Power Output(USB TYPE A Female): DC5V 2.4A
Data&Power INPUT Port: from RJ45 female (Compliant with IEEE802.3af/at PoE)
Data Output Port: RJ45 Male
Power Output Port: USB TYPE A Female
Data Transfer Rate: 10/100/1000Mbps
Data Pin: RJ45 pin 1,2,3,4,5,6,7,8
Devices will be detected before poe input
Power Pin:support both 1/2(+/-),3/6(-/+) or 4/5(+),7/8(-)
Body size: 80 x 27x 22 mm
DC cable length：165mm
RJ45 Modular Plug cable length：155mm
Weight : 55g
Operation Temperatue:-20℃ ~ 45℃
Storage Temperature:-30℃ ~ 70℃

RJ45 female INPUT Port:
Support the IEEE 802.3af/802.3at the Power over Ethernet PoE Switch
Support 48V-55V Unsolicited Power Over Ethernet PoE Switch
Support 48V-55V Unsolicited Power Over Ethernet PoE injector

Item Included:
Gigabit Ethernet 5V2.4A Active PoE Splitter(USB TYPE A Female) x1

Note:
Yellow LED(power) will be light up when USB connects to the device. Green LED(data) never light in any circumstances. This splitter allows data to input and output through its RJ45 port, but no indicator on this splitter indicates the status of the data transfer. Only one power indicator shows the working status of the POE.

When using 80.3af/802.3at standard PoE switch (or injector) to connect this PoE splitter,and the Power Output Port (USB TYPE A Female) is not loaded (unconnected device), the PoE splitter will enter standby mode. Data Output Port (RJ45 Male) will not work at this moment.