EPLZON TXS0108E High Speed Full Duplex Logic Level Converter

This module is a directionless voltage-level translator specifically designed for translating logic voltage levels.

While this device is designed for open-drain applications, the device can also translate push-pull CMOS logic outputs.

The TXS0108E device has two functional modes; enabled and disabled.

This 8-bit non-inverting translator uses two separate configurable power-supply rails.

When the output-enable (OE) input is low, all outputs are placed in the high-impedance (Hi-Z) state

Feature:
Provide two-way communication capability
VCCA side support voltage: 1.2V-3.6V
VCCB side support voltage: 1.65v-5.5v
Can provide 3.3-5V, 1.8-3.3v and other common level conversion capability
No Direction-Control Signal Needed
No Power-Supply Sequencing Required – Either VCCA or VCCB Can Be Ramped First

Main applications:
5V and 3.3V MCU module
3.3V and 5V MCU module
Compatible and other communications support
MCU and SD card communication level conversion
SCM、I²C、SPI serial device level converter
OE active high enable IO recommended by a low voltage side of the IO port

Package included:
5set*TXS0108E High Speed Full Duplex 8 Channel Logic Level Bi-directional Converter Module