Search

Search

Alstar Middle-Sizes Dovetail with one Screw - for telescopes and Cameras

KWD 12
Brand
Alstar
Category
Telescopes
– 1 +

Special Features

  • The clamp itself can be adapted to a mount, to the counterweight shaft or another dovetail bar, building a double connection.
  • For attaching the clamp, 7 bores are available for M6 and 1/4" screws. Four M6 bores at 38 mm distance square, one M6 bores lengthwise. One 1/4" tripod thread in the middle with two drilled (but not threaded) to accommodate screws up to 6mm in diameter, center-to-center screw hole spacing is from 27 to 43mm. All functions, especially the clamping, are completely kept. The clamping screw can be used without problems.
  • Areal clamping - protects the accessories and provides a very stable connection, two drilled (but not threaded) in the middle with to accommodate screws up to 6mm in diameter, center-to-center screw hole spacing is from 27 to 43mm.
  • A generously dimensioned surface with 25 mm width presses the bar against the othe side of the clamp.
  • Simply screw the dovetail clamp onto your photo tripod or tripod head, and you can mount your telescope on the tripod.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}