Specification:
Item Type: Ethernet Networks Module
Material: PCB
Purpose: Suitable for operation learning and development of college students, engineers, technicians, factories, DIY, electronic enthusiasts, etc.
Simultaneous Support: 3.3V & 5V
Support Hard-Wired TCP/IP Protocol: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
10BaseT/100BaseTX Ethernet PHY Embedded System
Automatic Response (full duplex/half duplex mode): Support
8 Independent Sockets at the Same Time: Support
Internal 32Kbytes memory for Tx/Rx buffer
Shutdown Mode: Support
Wake on LAN: Support
Interface: for SPI interface (for SPI MODE 0.3) to facilitate the connection with the microcontroller
for SPI Clock Frequency Maximum: 80M
Size: Approx. 55 x 28mm/2.2 x 1.1in
Pin Definition:
Pin HeaderFunction DescriptionPin HeaderFunction Description 3.3V3.3V power input pin 5V5V power input pin MISOfor SPI master input slave output pin GNDPower ground pin MOSIfor SPI master output slave input pin RSTW5500 hardware initialization pin (active low) SCSfor SPI SLAVE selection pin (active low) INTW5500 interrupt pin (active low) SCLKfor SPI clock pin NCSuspend
Package List:
1 x Ethernet Networks Module