Product Features:
Model: NS106
Working frequency: 125KHz / 13.56 MHz
Working voltage: DC 5V, Working current: 200mA
Equipped with a USB cable. Using the USB cable to connect to computer, then you will find the software on computer.
Driver-free, no need to download software installation.
With two-color LED light working indicator, built-in buzzer "beep" sound reminder.
Card type which be supported to read: 125KHz frequency cards, such as EM4100/EM4200, TK4100, T5577, etc. And 13.56MHz frequency cards, such as M1 classic 1k card, UID card, Ntag213, Ntag215, Ntag216, etc.
Card type which be supported to write: 125KHz frequency cards, such as EM4305, T5577. And 13.56MHz frequency cards, such as UID cards.
Card type which be supported to decode: only support 13.56MHz cards, such as UID FUID CUID UFUID IC semi-encrypted card, IC full encryption card.

Parameter of RFID Keyfobs:
Working frequency: 125KHz + 13.56MHz, dual frequency
Chipset: UID and T5577 dual chip
Features: can read and write, rewritable, not HID card. Can be used to copy UID code from other card.
Yellow color
Material: ABS plastic

How to use the card reader?
1) Connect the device to your computer via the USB cable.
2) Then you can find the software on your computer.

Attention:
1, The software of this card copier is only compatible with Windows system, such as Windows 10, Windows XP, Windows 7, etc. But can not work with MAC or Linux system.
2, When you copied a card, the frequency of the copy card must be the same as the original card.
3, Not all encryption cards can be decrypted. If you are unsure, please consult our customer service before ordering.