COMPATIBILITY:
for 2007-2010 Saturn Outlook
for 2008-2017 Buick Enclave
for 2007-2008 Cadillac SRX
for 2007-2014 Cadillac Escalade (includes ESV and EXT)

for 2007-2014 Chevrolet Suburban (includes 1500 and 2500)
for 2007-2014 Chevrolet Tahoe
for 2009-2017 Chevrolet Traverse
for 2007-2014 GMC Yukon (includes XL)
for 2007-2016 GMC Acadia

How to Program your Key Fob Replacement (Up To 2010*):

Option 1 (for vehicles with the Driver Information Center)
1.Insert key and switch the ignition ON (just shy of starting vehicle without cranking engine)
2. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY is displayed.
3. Press the set/reset button (button will have a checkmark) until REMOTE KEY LEARNING
ACTIVE is displayed. The vehicle is now in programming mode.
4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately
15 seconds. An acoustic signal willbe heard indicating successful programming.
5. Repeat step 4. to program additional remotes. You can have up to 8 programmed remotes for
this vehicle. You must program ALLremotes including existing remotes.
6. To exit programming mode turn ignition OFF, remove key and test all remotes.