Raspberry Pi Pico W Microcontroller Board with pre-soldered headers , Built-In WiFi, Based On Official RP2040 Dual-Core Processor

Board Specifications
Based on Raspberry Pi Pico, Raspberry Pi Pico W comes with a wireless communication module. The wireless module hardware uses Infineon's
CYW43439 wireless chip, which supports Wi-Fi 4 wireless networks in the 2.4 / 5 GHz band, making it the perfect solution for wireless network control and communication..

Key features include:
RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
Onboard Infineon CYW43439 wireless chip, supports 2.4/5 GHZ Wi-Fi 4
264KB of SRAM, and 2MB of on-board Flash memory
Castellated module allows soldering direct to carrier boards
USB 1.1 with device and host support
Low-power sleep and dormant modes
Drag-and-drop programming using mass storage over USB
26 × multi-function GPIO pins
2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
Accurate clock and timer on-chip
Temperature sensor
Accelerated floating-point libraries on-chip
8 × Programmable I/O (PIO) state machines for custom peripheral support

Package Content
Raspberry Pi Pico W with pre-soldered header x1
1*3PIN yellow pin header x1
USB-A to micro-B cable x1

FAQ
What can I do if the Raspberry Pi Pico is disturbbed?
1. The pin that sets the input state must be initially pulled high or pulled low.
2. Replace the USB cable to see if there is a problem with the USB cable used.

Note
Online Development Resources is provided , please contact us if you have any problem .