Self-Programmable Remote Car Key Replacement
A website link to free DIY programming instructions and demonstration video will be provided with every order.
Compatible with:
FORD MUSTANG 1999 - 2012
FORD TAURUS 1998 - 2012
FORD FOCUS 2000 - 2012
FORD FUSION 2006 - 2012
FORD ESCORT 1998 - 2003
FORD EXPEDITION 1998 - 2012
FORD EXPLORER 1998 - 2012
FORD ESCAPE 2001 - 2012
FORD THUNDERBIRD 2002 - 2005
FORD FIVE HUNDRED 2005 - 2007
FORD CROWN VICTORIA 2007 - 2010
FORD EXPLORER SPORT TRAC 2001 - 2010
LINCOLN AVIATOR 2003 - 2005
LINCOLN NAVIGATOR 2001 - 2012
LINCOLN TOWN CAR 1998 - 2009
MERCURY COUGAR 1999 - 2002
MERCURY GRAND MARQUIS 2006 - 2011
MERCURY MARINER 2005 - 2011
MERCURY MONTEGO 2005 - 2007
MERCURY SABLE 1999 - 2005
MERCURY TRACER 1999

How to Program your IkeyOption Key Fob Replacement:
Option 1:
1.Close all doors, then open driver's door and press the Unlock button on driver's door while it is open and insert key into the ignition.
2.Turn ignition from OFF to RUN 8 times within 8 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming
mode. (if the door locks do not cycle, then it was done incorrectly. You must start over by removing key and beginning from step 1)
(Off is the position where you can remove your key, RUN is the position just shy of starting your car.)
3.Within 10 seconds press any button on the first keyless remote to be programmed. Door locks will cycle to confirm programming. If you
only have one remote then skip to step 5.
4.Within 10 seconds, press any button on the second keyless remote. Door locks will cycle again to confirm programming. Repeat step 4
for all other remotes.
5.Turn ignition to OFF. Locks will again cycle to indicate the end of programming mode.(If this does not work try the procedure with the door closed)