Allows for the addition of new 6x9 inch speakers or the relocation of existing 6x9 inch speakers without having to spend a fortune on a custom install. This pod is deep set to allow for the installation of the speaker for a flush air tight mount without the need of having to cutout the bottom of the pod. The Angle design allows you to directionally point the audio. 1" lip allows your to mount at multiple points plus you can use silicone or adhesive to adhere the two surfaces, great when inverting the speakers and hanging them from overhead. Special Note: Speakers are not included in purchase. Returns will not be accepted for returns modified after purchase. No installation hardware is included- the speaker mounting hardware is typically provided with a new set of speakers. The hardware for mounting the flat flange of the pod will vary depending on mounting location and type of material that it is being mounted to. If installation area cannot fit the flange this can be removed and the screw dimples used with long screws