Self-Programmable Remote Car Key Replacement
These are 1 Brand New replacement Remote Head Key fobs transmitter for select GM vehicles that
comes complete including battery. 100% new, never used remote, uncut blade.
If you have one working Key Fob.
1. Insert working key into ignition and turn to ON then OFF and remove.
2. Within 10 seconds insert new cut key into ignition and turn to ON for 5 seconds then OFF and remove.
3. New key and fob are now programmed.
4. A maximum of only 8 keys can be programmed into system.

ABOUT PROGRAMMING:
This remote head key fob must be cut and programmed in order to start the engine.
In order to perform the DIY programming for this key, you need to have 1 working original
key that starts your vehicle. Also, your new unprogrammed key must be cut prior to performing
self-programming.
PLEASE NOTE: CANADIAN vehicles require programming by a locksmith or dealership.
Please be sure to check the vehicle Compatible with: guide below. Please make sure that your
original remote has the same exact buttons on it.
Important: WILL NOT WORK FOR VEHICLES WITH PASSIVE ENTRY
(also called PEPS key, smart key or proximity system)
Compatible with: (your vehicle must already be equipped with keyless entry for the remote to work)

2010-2016 Chevy Camaro
2010-2016 Chevy Equinox
2011-2016 Chevy Cruze
2012-2017 Chevy Sonic
2014-2017 Chevy Impala
2013-2016 Chevy Malibu

2010-2017 GMC Terrain
2010-2016 Buick LaCrosse
2011-2017 Buick Regal
2012-2017 Buick Verano
2014-2017 Buick Encore
2010-2012 Buick Allure

* 2016 Chev rolet Cruze has 3 possible remote flip keys, please verify the key you need.