Search

Search

waveshare USB Blaster V2 Download Cable Programmer Debuggers, High-Speed FT245+CPLD+244 Solution, Support ALTERA FPGA/CPLD Devices, AS, PS, JTAG Three Download Modes

KWD 14
Brand
waveshare
Weight
90 g
All electronics ship with US style plugs. You may need a voltage converter or a plug adapter.
– 1 +

Special Features

  • USB Blaster V2 Download Cable, compatible with ALTERA USB Blaster FPGA/CPLD programmer. The USB Blaster Download Cable interfaces a USB port on a host computer to an Altera FPGA mounted on a printed circuit board.
  • The cable sends configuration data from the PC to a standard 10-pin header connected to the FPGA. You can use the USB Blaster cable to iteratively download configuration data to a system during prototyping or to program data into the system during production.
  • It surpports most of the ALTERA FPGA/CPLD devices, Active Serial Configuration devices, Enhanced Configuration devices. It supports AS, PS, JTAG three download modes. Supports 1.2-5V programming voltage. Supports Nios II of embedded processor communication and debugging.
  • 【Hardware Solution】 1) High speed FT245+CPLD+244 solution, similar download speed as the original ALTERA USB Blaster, with the same operation. 2) Download speed 1-3 times faster than other schemes, such as 68013 or C8051F.
  • 【Supported Devices,Tested devices are listed below, including but not limited to:】 CPLD: MAX3000, MAX7000A/B/S, MAX9000 and MAX II etc. FPGA: Stratix, Stratix II, Cyclone, Cyclone II, CycloneIII, ACEX 1K, APEX 20K and FLEX 10K etc. Active Serial Configuration Devices including: EPCS1, EPCS4, EPCS16 etc. Enhanced Configuration Devices including: EPC1, EPC4 etc.

Description

Key Features
1) Hardware Solution
High speed FT245+CPLD+244 solution, similar download speed as the original ALTERA USB Blaster, with the same operation.
Download speed 1-3 times faster than other schemes, such as 68013 or C8051F.

2) Performance
Supports most of the ALTERA FPGA/CPLD devices, Active Serial Configuration devices, and Enhanced Configuration Devices.
Supports AS, PS, JTAG three download modes.
High-speed, stable, and internal FT245R+CPLD designed.
Supports 1.2-5V programming voltage.
Supports Nios II of embedded processor communication and debugging.

3) Supported Softwares
Quartus II integrated development environment.
NIOS II IDE integrated development environment.
NIOS II EDS integrated development environment.

4) Supported Devices
Tested devices are listed below, including but not limited to:
CPLD: MAX3000, MAX7000A/B/S, MAX9000 and MAX II etc.
FPGA: Stratix, Stratix II, Cyclone, Cyclone II, CycloneIII, ACEX 1K, APEX 20K and FLEX 10K etc.
Active Serial Configuration Devices including: EPCS1, EPCS4, EPCS16 etc.
Enhanced Configuration Devices including: EPC1, EPC4 etc.

5) Connects to PC
Computer connection via USB 2.0 interface.

6) Connects to target board
Target board connection via JTAG, AS, PS interfaces.

LED Status
Red LED: Power indicator
Green LED: Signal indicator, the LED is on while downloading/programming

Online Development Resources /User Manuall://bit.ly/3njOq7l

Package Content
USB Blaster V2 × 1
USB Cable × 1
10-pin cable × 1

Question:USB Blaster is used under Windows, do I need a driver?
Answer: A driver is required, and the driver is provided with the Quartus software. After installing the software, you need to manually load the USB blaster driver in the device manager, see the user manual for details.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}