1.1.69inch LCD Display Module
Embedded ST7789V2 Driver Chip, Using SPI Interface
Comes with examples for Raspberry Pi, Arduino, STM32, etc.

2.Onboard Voltage Translator
Compatible With 3.3V / 5V Power Input

3.Onboard SPI Control Interface
For Use With Controller Boards Like Raspberry Pi / Arduino / STM32

Specifications
Operating voltage: 3.3V/5V (Please ensure that the power supply voltage and logic voltage are the same, otherwise it will not work properly.)
Communication interface: 4-wire SPI
Display Panel: IPS
Control chip: ST7789V2
Resolution: 240 (H)RGB × 280(V)
Display size: 27.972mm × 32.634mm
Display R angle: 4-R5 (mm)
Pixel pitch: 0.11655mm × 0.11655mm
Dimensions: 31.5mm × 39.0mm

Module & Control Chip
1.The embedded controller used in this module is ST7789V2, an LCD controller with 240 × RGB × 320 pixels, and the pixels of the LCD itself is 240(H) ×
RGB × 280(V), so the internal RAM of the LCD is not fully used.

2.This LCD supports input color formats of 12-bit, 16-bit, and 18-bit per pixel, which are RGB444, RGB565, and RGB666. This demo example uses the
RGB565 color format, which is also a commonly used RGB format.

3.The LCD uses a four-wire SPI communication interface, which greatly saves GPIO ports with faster communication speeds.

4.TThe resolution of this module is 240 (H) x RGB x 280 (V), but due to the four round corners (see specifications for dimensions), some parts of the input
images may not be displayed.

Package Content
1.69inch LCD Module x1
GH1.25 20cm 8Pin cable x1

Note
Development Resources is provided , please contact us if you have any problem .