Feature:
Working Frequency: FM 80MHz-108MHz
Gain: FM 10dB
Impedance: 75 Ohm nominal
VSWR: Max 2.0 : 1
Working Current: 10mA - 30mA
Working Voltage: DC 10.5V - 16V
Antenna Connection: DIN plug connector
Working Temperature: -40 - 85 ℃

Reduce the noise
Strong anti-interference
Protect the work of FM radio stations
Work for both AM and FM radio reception

Installation :
1.First, test if the radio is in good condition.
2.After the test is completed, turn off the flame, turn off the power, and start to remove the decorative frame.
3.After the decorative frame is removed, it is easy to take out the host.
4.After the main unit is pulled out, the antenna connector can be seen. Before buying, please confirm whether the antenna connector is consistent with the amplifier.
5.String the amplifier between the antenna and the radio.
6.Find the ACC line.
7.Put one end of the white line on the fuse and fix it.
8.Screw the other copper wire that can be activated by the white wire into a strand, and smash it onto the contact of the connector, and cooperate with the key to switch the switch.
(Note: only one contact can be made at a time, carefully short-circuit with other contacts)
9.The key switch is turned on, the amplifier's light is on, the key is turned off, and the light is off. The description has correctly found the ACC. You can test the effect first.
10.The test radio effect has been significantly improved, and the collinear clip is used on the ACC, no need to peel. The position of the clamp is recommended to be far from the radio position.
11.Buckled the magnetic rings, the position of the magnetic ring is determined according to the actual situation.

Package Included:
1 X Antenna Radio Amplifier
1 X Adhesive
1 X Red Clip
1 X Blue Clip