Programmable DC Load: 0~150V/0~30A/0~150W; Resolving: 0.1mV/0.1mA; Size: ½ 2U; Optional RS232/USB interface; 220V±10%/110V±10% transfer switch is selectable on the rear panel.
List Function: You can use this function to edit a test program consisting of multiple steps: step counts, time width of single step, step value and slope, then the load will automatically run according to the setting value and save the test data automatically. List mode allows you to generate a complex current sequence to accomplish dynamic and precise test which can save cost for you. (This function needs a RS232/USB communication module accessory)
Battery Discharge Test: After selecting the discharge test mode, you can set termination conditions of test mode: "cut-off voltage", "cut-off capacity" and "cut-off time". When any of the three conditions are met, discharge test will be stopped, the load will be automatically switched to OFF status. During the test, you can observe and save the voltage, time and discharged capacity of the battery.
Remote Sense: Thers is a remote measurement terminal at the rear panel of the dc load. When the electronic load consumes a higher current, it will generate a larger voltage drop between the connected device and terminals of the load, and this function can compensate for voltage drops in the load leads. You can use this terminal to measure the output terminal voltage of DUT to get more accurate measurement data.
Package Contents: Programmable DC Electronic Load, Certificate, User Manual, Calibration Report, Power Cord ( Notice: The Red and Black Test Line and USB Communication Module are optional accessories, not standard accessories, you can buy these two products in ITECH Electronic store）
LAMPVPATH (Pack of 3) 2 AA Battery Holder, 2 AA Battery Holder with Leads, 2 AA Battery Holder with Wires
KWD 3
HEDBOX | HED-DC40/F770 | Battery F770 with Single Charger Kit (4400mAh)
KWD 20.500
18650 Battery Charger for 3.7V Lithium-ion 18650 18500 16340 14500 21700 26650 Batteries,AAA AA Battery Charger For1.2V Ni-MH/Ni-Cd AA AAA C Battery
KWD 3.500
priaolker 4 AAA Cylindrical Battery Adapter Brackets for Converting to C Batteries, Pack of 2
KWD 3.500
