Features:

Material: 316L stainless steel
Model: connector for all Apple Watch Ultra / Series 8 / Series 7 / SE / Series 6 / Series 5 / Series 4 / Series 3 / Series 2 / Series 1 Nike+ Sport Edition
Colors: black,silver, rose gold

How To Change Your Apple Watch Band :

Step 1: Separate your watchband from old lugs.

①. On the back of the Apple Watch's case, press and hold on one of the two buttons located just below each end of the wrist strap.

②. With the button held down, slide the end of the band left to remove it.

③.Remove two screws on the top of the adapter. This will free the top bar of the lug from the pieces that slide into the material of the band.

④.Slide out two metal bars that connect the band to the lug. The bars seemingly unified piece of metal is actually two pieces connected in the middle.

Step 2: Add the replacement adapters to your watchband

①.Use our screwdriver to remove the screws, freeing the top bar from the parts that slide into the band.

②.Slide the two metal pieces into the band.Position the top bar over the metal pieces so that the screw holes are lined up.Screw in the screws, making sure to get everything nice and tight.

Note:The side with the flat metal oval should face the inside of the band.