The Haoge 49mm Square Metal Screw-in Lens Hood with Hollow Out Designed and Metal Cap are specially designed for the lens with 49mm filter size.

Features:
49mm Square Metal Screw-in Lens Hood with Cap.
With screw mount can be attached to all 49mm lens or filter thread.
Designed to minimize lens flare by deflecting stray light from entering lens.
Provide additional protection to the camera and lens from accident scratching.
Come with metal cap.
Hollow Out Designed.

Specification:
Brand: Haoge
Model: LH-ES2
Thread: 49mm
Material: Metal
Color: Silver

Compatible with:
49mm Filter Thread Lenses of Canon, Nikon, Sony, Minolta, Pentax, Olympus, Panasonic, Leica, Zeiss, Contax...

How to Install:
1. Screw the lens hood and lock ring clockwise into the thread to the end, don't have to tighten it.
2. Rotate lens hood and lock ring anticlockwise, until lens hood horizontality.
3.Keep lens hood horizontality, and rotate the lock ring clockwise until tight.

How to uninstall:
1. Keep lens hood steady, and rotate the lock ring anticlockwise until to the end.
2. Rotate lens hood and lock ring anticlockwise, until they are away from the lens or filter.

NOTE: the lens hood is compatible with the lenses with 49mm filter size. Please verify your camera's lens thread size before ordering. Your camera's lens thread size will be marked somewhere on the lens barrel or printed underneath your lens cap. This number is always preceded by a "Ø" (diameter) symbol. For example: Ø49 = 49mm lens thread size.

Package Included:
1 x Haoge 49mm Square Metal Screw-in Lens Hood with Hollow Out Designed
1 x Metal Cap
(Note: this is a Screw-in Hood, not Bayonet Hood)