XL6019 is a monolithic integrated circuit specially designed for boost and buck. It can work in the range of DC 5V to 40V input voltage, low ripple and built-in power MOS.

- The conventional fully integrated constant voltage output scheme has fewer peripheral devices and lower system cost.
- Wide voltage range input, high input voltage up to 35V
- The output voltage can be adjusted to support 40V.
- Built-in over-temperature protection and over-current protection complete set of reliability protection circuit, high reliability.
- Conversion efficiency of the system can reach more than 90%, which is convenient for thermal design.
- Wide input voltage range from 5V to 40V
- 1.25v output voltage sampling voltage
- SW built-in over voltage protection function
- Fixed 22KHZ switching frequency
- Large 5A switching current
- Over 94% conversion efficiency
- EN foot TTL turn-off function
- Excellent linearity and load adjustment rate
- Built-in power MOS

Instructions:
1. Power (3-35V), power indicator light, the module is working properly.
2. Adjust the blue potentiometer knob (counter-clockwise general boost, buck clockwise rotation) and with a multimeter to monitor the output voltage reaches the required voltage.

NOTE:
1.Input and Output must be connected correctly.
2.Current work long hours is recommended for use in less than 2.5M, while adding bulk Heat sink (10W output above); because it is boosting module, in order to ensure stable output Set, please keep the minimum 1.5V differential.

Package Included：
4pcs XL6019 5A Current DC to DC Adjustable Boost Power Supply Board Module