MT3608 DC-DC Adjustable Step-Up Power Converter Module With USB Connector.
The MT3608 Mini DC-DC Voltage Converter Board device switches at 1.2MHz and allows the use of tiny, low cost capacitors and inductors to minimize the overall module size. Internal soft-start circuitry results in small inrush current and extends battery life.
This diy boost converter module features the MT3608 2 Amp step up boost converter, which can take input voltages as low as 2V and step up the output to as high as 28V. It means you can get 9V 12V 18V 24V Voltage (Input voltage range: 5V USB or 2V ~ 24V solder pads).
The MT3608 features automatic shifting to pulse frequency modulation mode at light loads. It includes under-voltage lockout, current limiting, and thermal overload protection.MT3608 Voltage Boost Module Parameter:
Plug Format: Micro USB
Item Weight: 0.04 Pounds
Output Voltage: 5 Volts
Input Voltage: DC 2V-24V
Output Voltage: DC 5V-28V
Maximum Output Current: 2A
Maximum Conversion Efficiency: 93%
Board Size: 30 X 17 X 14mm/1.18 X 0.67 X 0.56inch (L*W*H)
Package Size: 4.83 x 3.19 x 1.54 inches
Package Weight: 1.75 ounceMethod of Use:
The voltage boost converter module of the IN+ and - after 2-24V, IN adjusting the potentiometer can adjust output voltage, output voltage is greater than the input voltage. Matters Needing Attention:
1. The input voltage of step up boost converter module should not exceed the maximum input voltage; This is a dc dc booster module, so the output voltage should be at least 2V higher than the input voltage. (Maximum output voltage: 26V.)
2. Do not reverse the positive and negative poles to avoid any possible damage.
3. When receiving the diy voltage booster module, before power on it. please rotate the potentiometer with 15 laps in a clockwise direction.Package Included:
8 X MT3608 DC Voltage Regulator Board with Micro USB