FRM01 Multifunction Infinite Loop Timing Self-Lock Relay Cycle Timer Module Automation Delay

Timing Pick/off: After powered, time delay relay pull T1, T1 between 0.1 seconds - 270 hours adjustable, CH1 interface to a high level pulse signal, then repeat the above functions.
Timing pull off again: After power relay to not pull, the delay time T1 reaches the relay is energized, pull the relay off after T2 arrival time, delay time T1 and T2 in 0.1 seconds - 270 hours between adjustable, CH1 interface to a high pulse signal, repeat the above functions.
Infinite loop timing mode 1/2: After power relay to not pull, after the delay time T1 reaches the relay is energized, pull the relay off after time T2 arrives, and then repeat the above condition, the delay time T1 and T2 at 0.1 adjustable between second - 270 hours, giving a high level pulse signal CH1 interface, you can restart the above functions.
Latching/Trigger relay modes: CH1 interface to relay a high level pulse signal, relay gives a high pulse signal relay disconnected.
Pull/Trigger the timing: After power relay does not act, a high-level interface to CH1 pulse signal, the delay time relay pull T1, T1 between 0.1 seconds - 270 hours adjustable, repeating a high level interface to CH1 pulse signal, then repeat the above function.

Hello,