This hub adapter splitter cable can expand the DC 12V/24V power output of the camera's Fischer 3-holes RS interface out of 4 dtap, so you can easily power other camera accessories with the extended 4 dtap; It has a 12V voltage regulator module, which can convert the 12V/24V voltage of camera's Fischer 3Pin RS output to 12V output,So 4 dtap output voltage value is 12V.
With this PowerTap Receptacle, you can expand any Power Tap to accommodate up to four separate. powering multiple wireless receivers, on-board monitors as well as an Ultralight from the camera's Fischer 3-holes RS interface.Such as ARRI Alexa cameras, kit 3-pin power supply port expands.
Plug A: Fischer 3 Pin with Regulated Connector; Plug B: 4 Port D-tap Female Connector.
Max work current: 10 amp max total. Cable Length: 24inches/60cm(We can customize with other length, please contact us if you need)
Each cable we produce has been rigorously tested and is compatible with machines from a variety of major brand suppliers,We are committed to all the products are qualified and high-quality.
Description
Professional product design
SZRMCC As a connector and cable manufacturer, we produce more than 1,000 kinds of cables, accessories and adapters.
We also produce wireless antennas and aviation audio cables.
Each cable we produce is strictly tested and compatible with machines from various major brand suppliers.
Provides good connections for your camera and camera accessories, allowing you to easily build your entire camera system. Perform various professional photography.
We can customize the cable according to your requirements. If you are not sure which cable is suitable for your project, please send a message about your problem and we will recommend the correct cable for you.
I hope you have a good time shopping at SZRMCC, thank you! ! !