Name:Fsuoech 1.12 Inch 96x96 White-Light OLED LCD I2C module
This OLED display module is 1.12¡± diagonal, it is made of 96x96 individual White OLED pixels, each one is turn on or off by the controller chip.
It works without backlight, that is, in a dark environment OLED display is higher compared to that of LCD display you will like the miniature for its crispness.
The Driver chip of this OLED is SH1107, which is compatible with IIC communication. So this module can be controlled by I2C. That is, except the VCC and GND, 2 wires would be needed when using 4-wires I2C mode.
There is also a simple switch-cap charge pump that turns 3.3v into a hight voltage drive for the OLEDs, making this module the easiest ways to get an OLED into your project

Features: OLED self-luminous, no backlight
Size: 1.12¡±
Driver IC: SH1107
Voltage: 3.3V DC
Viewing angle: > 160¡ã
High resolution: 96 x 96
Working Temperature: -30¡ãC~80¡ãC
Color: White light
Module Size: 38mmx30mm x6mm
Screen material: glass, need good protection
Interface Type: IIC/I2C-4PIN
GND: Ground
VCC: 3.3V
SCL: I2C Serial Clock
SDA: I2C Serial Data

Applications: MP3, MP4, watch Head-mounted displays Meters and other intelligent instruments Design any pretty patterns for your beloved electronic devices!

Note: OLED is self-luminous, no backlight needed! It does not respond when you just connect it to the mains, you have to program it and work properly, then it will display normally.

Package including:
5pcs Fsuoech 1.12 Inch 96X96 White OLED Display Module, 5pcs 4pin wires