Features:
1.Network Port: 4 x 10/100M Ethernet Port & 1 UpLink Port
2.Network surge protection and 15KV ESD protection ,adapt to a harsh extreme outdoor environment;
3.DC 5v-58v ultra-wide dual power input with voltage connected to the anti-protection circuit
4.LED indicator light: Power, network.
5.Signal enhancement and prevent network loop buttons
6.Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard.
7.Transmission distance: 250m/820.2ft
8.PSU:Input voltage:DC 5-58V /1.5W; Reverse connection: support
9.Support IEEE802.3、IEEE802.3u、IEEE 802.3x、IEEE 802.3az.
10.Forward rate: 10 MBPS / 14880 PPS, 100 MBPS / 148800 PPS.
11.Wide temperature, adapt in -40°～ 85°C tough extreme environment.
12.Working humidity:5%～90%,non-condensing.
13.Installation:Desktop & Din-rail mounting
14.Size:118x80x30mm

Package: 1x 5 Ports Network Switch

NOTE：
1.When the button is turned on, the communication signal of the 5th port(upLink port) of the switch increases, and the 1st to 4th ports can't communicate with each other.
2.In the power-on state, turn on the signal enhancement switch, and the switching mode fails. Please power off the switch and power it on again.
3.NOTE:This is not a poe power swith.