All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
ESP32-S3-DevKitM-1-N8 is a general-purpose Wi-Fi and Bluetooth LE combo modules that have a rich set of peripherals. (ESP32-S3-MINI-1 comes with a PCB antenna). (ESP32-S3-MINI-1U comes with an external antenna connector). At the core of the modules is ESP32-S3FN8, a chip equipped with an 8 MB flash. Single USB-to-UART bridge chip provides transfer rates up to 3 Mbps.
All available GPIO pins (except for the SPI bus for flash) are broken out to the pin headers on the board for easy interfacing.
There are three mutually exclusive ways to provide power to the board: USB-to-UART Port and ESP32-S3 USB Port (either one or both), default power supply (recommended)/ 5V and G (GND) pins/ 3V3 and G (GND) pins. Addressable RGB LED, driven by GPIO8.
ESP32-S3-DevKitM-1-N8 is an entry-level development board. Compatible with Windows, Linux, or macOS. Holding down Boot and then pressing Reset initiates Firmware Download mode for downloading firmware through the serial port.
The product documentation link cannot be displayed. If you need technical documentation, Please click “Ask a question”
RoboCore Master Kit for Arduino with Blackboard UNO R3
KWD 32
Makeronics Developer Kit for Jetson Nano -7inch Touch| IMX 219-77 Camera with Case| 64GB Class 10 TF Card with Card Reader | Jetson Nano Acrylic Case for Both A02 and B01
KWD 69
-5%
youyeetoo Sipeed Tang Primer 20K FPGA Development Board MCU, with LUT4, PMOD Port *4, for RISC-V and Embedded Development (with Dock ext-Board)
KWD 20.500
Geekstory 5PCS DS3231 Real Time Clock Module RTC Sensor High Precision AT24C32 IIC Timer Alarm Clock for Arduino Raspberry Pi
KWD 5
