Specification
Input Voltage: 6 - 27V
Maximum Current: 43A
Input Level: 3.3V - 5V
Control Mode: PWM or Level

Methond 1:
VCC is connected to 5v power supply of Mcu,GND is connected to GND of MCU
R_EN and l_When en is short circuited and connected to 5V level, the driver can work
L_PWM,input PWM signal or high level motor for ward
R_PWM,input PWM signal or high level motor reverse

Methond 2:
VCC is connected to 5V power supply of MCU,GND is connected to GND of MCU
R_EN AND L_EN short circuit and input PWM signal for speed regulation
L_PWM,pin input 5V level,motor forward
R_PWM,pin input 5V level,motor reversal

Features:
- The drive adopts a full H bridge drive module composed of high power drive chip BTS7960, with overheating and overcurrent protection function.
- The dual BTS7960 H bridge drive circuit has powerful driving and braking effects, effectively isolating the microcontroller and motor driver.
- Dual BTS7960 high current (43A) drive.
- 5V isolated with the microcontroller, effectively protecting the microcontroller.
- It can realize forward and reverse rotation of the motor, two PWM inputs, and the maximum frequency is 25KHZ.
- Two channels of overcurrent and overheat error signal output.
- Isolate the 5V power supply of the chip (it can share 5V with the microcontroller).

Package Include:
1 x Motor Drive Board Module