The Anderic RRAV498 is an exact replacement of the original Yamaha RRAV498 remote control and replaces original equipment Yamaha AV receiver remotes. The RRAV498 will work right out of the package for compatible Yamaha AV receiver models listed (but not limited to) without any programming. The RRAV498 is a preprogrammed receiver remote for Yamaha, but can also be programmed to many other devices. This remote includes popular features like selection of the inputs along with full menu controls and, of course, all other buttons for normal operations. The RRAV498 can be programmed to other equipment using the provided operating manual or your original equipment manual of the AV receiver. Please refer to the operating manual for instructions on programming. Note: This remote only operates in ZONE 1. If your receiver supports ZONE 2, this remote will not operate ZONE 2 controls but will operate, as normal, for ZONE 1. - Preprogrammed for your Yamaha Receiver. No programming necessary. - Modeled after the original Yamaha RAV498 remote control. - The instruction booklet is included. - The RRAV498 can be programmed for use with other units (i.e. TV, DVD, SAT, Etc.). - Guaranteed to work your select Yamaha receivers (see "Used with Models" section to see if your unit is compatible). Works (replaces) the following Yamaha remotes: RAV293, WR002700, RAV331, WT926700, RAV334, WT927000, RAV336, WT927200, RAV432, WW510400, RAV434, WW510600, RAV435, WW510700, RAV436, WW510800, RAV463, ZA113500, RAV491, ZF303200, RAV494, ZF303500, RAV498, ZF303700, RAV499, ZG748900 - Models: YHT595, YHT595BL, YHT599U, YHT693, YHT693BL, YHT695, YHT695BL, YHT699U, YHT791, YHT799U, YHT893, YHT899U, HTR2064, HTR2064SZ, HTR3063, HTR3064, HTR3065, HTR4063, HTR4064, HTR4066, HTR5063, HTR5066, HTR6063, HTR6240, HTR6240BL, HTR6250, RAV331, RXA700, RXA710, RXS600, RXV367, RXV367BL, RXV371, RXV371BL, RXV373, RXV373BL, RXV375, RXV375BL, RXV465, RXV465BL, RXV467, RXV467BL, RXV471, RXV471BL, RXV475, RXV565, RXV56