Waveshare SIM7600G-H 4G Communication Module, Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH, Multi-Band Support, 4G/3G/2G, with GNSS Positioning-Standard Version
All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
Compatible with 2G/3G/4G network with global support. Supports dial-up, telephone call, SMS, TCP, UDP, MQTT, DTMF, HTTP, FTP, etc.. Supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station positioning
Onboard USB and UART interface, for dial-up Internet access, cloud platform communication, GNSS positioning, etc. Castellated holes with immersion gold design, small size, easy to integrate into the device by soldering directly or inserting via the pin header. Adapting USB/UART/SIM card/GPIO control pins, easy to develop and debug, better expansibility
Built in voltage translator, compatible with 3.3V/5V MCU motherboards. Supports multiple power supply methods: USB port, VIN pin, and VBAT pin (for 3.7V lithium battery). Onboard multiple protection circuits: TVS protection for SIM card, power supply isolation between the USB port and pin header, VIN pin power supply anti-reverse, and so on, more safe and reliable.
2x LED indicators, easy to monitor the operating status. Adopts SIMCOM recommended power supply solution, supports 5~26V wide voltage power supply and 3A high current output, to prevent the module from dropping and restarting due to the large instantaneous power consumption, more stable and reliable in industrial use.
Onboard Nano SIM card slot, supports 1.8V and 3V SIM cards, near the edge of the board design, for easy accessing SIM card.. Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32). Adapting 3-ch antenna connector, IPEX antenna connector version and SMA connector version optional, supports mass customization
waveshare 1.69inch LCD Display Module, 240x280 IPS Screen, 262K RGB Display Colors, SPI Interface,Embedded ST7789V2 Driver chip, Using SPI Interface, Compatible with Arduino,Raspberry Pi, STM32, etc.
KWD 6.500
waveshare 5.65inch E-Ink Display HAT ACeP 7-Color E-Paper Module 600×448 Pixels eink Display epaper HAT Compatible with Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/WH,Jetson Nano,Arduino,Nucleo
KWD 26.500
waveshare 10.4inch QLED Quantum Dot Display, 1600×720 Resolution, Supports All Versions of Raspberry Pi, Compatible with Jetson Nano and PC
KWD 43.500
Waveshare 1.28inch Round LCD Display Module 65K RGB Colors 240×240 Resolution with SPI Interface Embedded GC9A01 Driver
KWD 8.500
