Description:
Product Name: Electric Knotting Machine
Item Type: Electric Knotting Machine
Material: ABS, Stainless Steel
Gross Weight: 131g / 4.6oz
Product Size: Approx.110 x 25 x 62mm / 4.3 x 1.0 x 2.4in
Suitable Type: PE wire (No.0.6-3) front wire (6-40lb)
Battery Type: Polymer battery (delivered with built in battery)
Battery Capacity: 300mAh
Battery Quantity: 1
Usage:
Step 1: use the wire clip to clamp the front wire disk
Step 2: The end of the front thread is facing up, and it is stuck into the left slot and also stuck at the bottom.
Step 3: face the main line of the pe line head up,stuck in the right
Step 4: Lift the net disk, tie the main line lightly with your right hand, wind it diagonally, and then turn it diagonally upwards
Step 5: Lift the spool, gently follow the main line with your left hand, wind it diagonally, and then diagonally upward
Step 6: remove the twisted wire
Step 7: smooth out the wire head pinch the front wire head and pe main line and use the pe wire head to wrap the two on a single knot
Step 8: Tighten the ends until the knot becomes tighter and darker (important)
Step 9: cut off the excess front plumb
Packing list:
Electric Knotting Machine x 1
Note:
1. Due to manual measurement, please allow 1-3cm error. Make sure you don't mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.