3.5 mm to Dual XLR Male Y Splitter Cable, 3.3 Feet Stereo 1/8 Mini TRS Headphone Jack to L/R Double XLR Male Aux Cord, Noise Free, Nylon Braided, for Studio Monitor Speaker and Phones
【3.5mm to dual xlr male cable】This cable is designed to carry audio signal from 1/8 jack device like mobilephone, computer, tablet and MP3, to XLR input device include mixer, DJ console, studio monitor, speaker, etc. Due to this cable can separate left and right channel signal, it is often used in audio recording and editing. The 1/8 mini TRS connector can work in both 3.5mm TRS or 3.5mm TRRS jack, please don't worry.
【Specification】This 1/8 to dual XLR splitter cable is 10FT/3meters long. It's nylon braided, strong and heavy duty. 3.5mm connector is gold plated, gold plated design can reduce signal distortion. 2 XLR end has blue and red ring, they will help you to distinguish left and right channel signal. The cable will give a soft feeling.
【OFC shield, noise free】This mini TRS to double XLR breakout cable is full covered with spiral OFC(Oxygen Free Copper). OFC layer can effectively keep out RFI and EMI. Under the OFC layer, there is also a aluminum foil layer. With OFC and aluminum foil layer, this cable will carry your signal without having to worry about interference. Anyway, we do not suggest to put the cable over AC power plugs, power adapters, chargers and others that ouput RFI and EMI.
【Important Notice】VERY VERY import, please kindly note that though this cable is 10FT long, the splice to the XLR end is only 1.4FT. So if you connect 2 XLR connector to two separate device like two powered speaker, you should make sure the two speaker don't stand too far away. In case if they have to, we suggest you to take our XLR extension cable together. (Search ASIN B0957D9K13 for XLR extension cable).
【Left and Right channel】The 2 XLR connectors will to insert into left and right channel speakers. The XLR connector with blue ring is connecting with the TIP of the 3.5mm TRS connector, this connector is usually used to connect left channel speaker. The XLR connector with red ring is connecting with the RING of the 3.5mm TRS connector, this connector is usually used to connect right channel speaker. But don't worry if you mix the two connectors, they can work.
Uonecn 10 Pin Male Plug to 4 XLR 3 Pin Breakout Audio Input Output Cable for Atomos Shogun Monitor Recorder Audio Splitter 30cm
KWD 29
Mugteeve Balanced 1/4 Inch TRS to TRS Male Interconnect Patch Cable, 15FT Stereo Quarter Inch 6.35mm to 6.35mm Audio Cord, Nylon Braided Heavy Duty, for Interface, Mixer, Speaker - 2PACK
KWD 7
HOSONGIN USB Guitar Cable - USB Interface Male to 6.35mm 1/4" TS Mono Electric Guitar Converter Cable (10 Ft, Black)
KWD 7
Mugteeve 1/4" TRS to XLR Male Cable Balanced - 6.6FT Quarter Inch Stereo to XLR Microphone Cord Adapter, Nylon Braided, OFC Shielded, Red Color, for Mixer, Monitor Speaker, Audio Interface, 2Pack
KWD 7
