Specification:
Type: Mute Clamp
Length: 20.3cm/8"
Material: Nylon
Color: Blue
Package includes: 1 x Nylon Mute Clamp + 1 x Carrying Case
Usage:
1.The stop tool is inserted obliquely into the gap of the right handle of the hammerhead of the tuned sound, and the stop head is fixed on the string that does not hinder the hammerhead striking and the movement of the damper head of the tuned sound. When the handle is released, it will naturally land on the back of the hammer. When using the stop clip, close the collets together and insert them into the gap between the right chord and the middle chord of the tested homophonic string group (Note: if the gap of the homophonic string group is small, a collet can be inserted), so that the front end of the collet can be squeezed in and fixed. This stops the vibration of the middle and right strings at the same time.
2.When the benchmark tone test is finished and the middle chord is to be adjusted, pull out the sound making tool from the chord and insert it into the gap between the tested homophonic string group and the next homophonic string group for fixing, so as to prepare for the middle chord adjustment. At this time, the stop tool is on the string, and the rubber stop fork uses the thickness of the wedge to squeeze the string to produce the fixed friction.
3.After taking the middle chord homophony, pull out the stop tool from the gap between the homophony group and the homophony group, and move it into the slot of the next homophony group. Prepare for the right chord homophony and the next homophony group's reference sound.
4.After adjusting the two or three homophonic strings, withdraw the stop tool from between the mallet handles, then move 2 or 3 mallet handles to the right and extend it in again.