For curved cuts in wood, corrugated boards, plastics and nonferrous metals. Also ideal for gourd carving. This very lightweight and powerful 12 volts machine is ideal for curved cuts in wood up to 3/8" (10mm), circuit boards up to 7/64" (3mm) and non-ferrous metals up to 3/32" (2.5mm) thickness. Its weight makes it easy to handle and thus allows for precise control of the cutting action. The specially balanced powerful permanent magnet motor with electronic speed control ensures variable speeds between 2,000 - 5,000 strokes/ min., stroke: 15/64" (6mm). With additional, rounded foot for cuts on rounded surfaces and clean interior cuts. Is exchanged for the normal saw table by unscrewing a screw. Ideal for gourd carving. Includes 2 saw blades (coarse and fine). Technical data: Direct voltage: 12 - 18V, Max. Power: 1/8hp (100W), Speed: 2,000 - 5,000 strokes/min, Length: 7.1" (180mm), Weight: 1 lb (480g). Note: The speed control of our 12-volt devices only works when operated via non-stabilized power supply units (e.g. all MICROMOT mains adapters). Connection to stabilized power supply units is possible. However, the devices will then operate with maximum rotational speeds (also applies to operation with batteries).
Proxxon jig saw STS 12/E. This lightweight 12-Volt machine is ideal for curved cuts in wood up to 3/8-Inch (10mm), circuit boards up to 7/64-Inch (3mm) and non-ferrous metals up to 3/32 (2.5mm) thickness. Requires 12V Transformer sold separately.