Features:
1. 100% brand new and high quality.
2. Cut perfect outside radius.
3. Half Round Corner Quick Locator for Woodworker
4. It helps to make the wooden board corner in round shape.
5. Quickly hold the wood board in position and convenient to the next processing.
6. This set of tools allows you to making trimming of the corner of the wood panel, and we called it Radius Corner Quick-Jig.

Specification:
Type: Jig Router Templates
Material: Aluminum Alloy
Color: Red
Quantity: 2pcs
Surface treatment: anodic oxidation (non paint)
Dimension: 80mm x 80mm x 19mm / 3.15" x 3.15" x 0.75"
R10 = radius 10mm = 0.3937 ≈ 3/8"
R15 = radius 15mm = 0.5906 ≈ 9/16"
R20 = radius 20mm = 0.7874 ≈ 3/4"
R30 = radius 130mm = 1.1811 ≈ 1-3/16"

Package include:
1 x R10 R15 Template
1 x R20 R30 Template
1 x Storage case

How to Use:
1. Put your finger into the middle hole of the radius jig template and pull it tightly against the Wood Panel. Keep your hand away from the tool during use.
2. After pressing the board close to the tool and cutting the tips of the board, which is roughly arc-shaped, and then walk slowly along the rounded template edge.

Attention Please:
* It should be used on a workbench such as flip chip wood milling.
* You should use a trimmer with a bearing on the top.
* The height of the trimming knife must be adjusted before use.
* The solid wood should be fed from left to right along the wood grain, not reverse milling.
* Observe if the trimming knife bearing is on the same plane as the fillet module when the machine is off to ensure that the milling cutter will not scratch the module, otherwise danger may occur.