Where one blade must do almost everything ripping and crosscutting hardwood and softwood, cutting plywood this blade is a good choice. It is in the traditional combination-blade configuration, with a flat-top tooth and 4 Alternate top bevel teeth in groupings of five. The large gullets at the raker tooth allow deep cuts with improved Chip Ejection, #610504C, (D) diameter: 10 (250mm), teeth: 50, (D) bore: 5/8, tooth grind: 4&1, hook angle: 15°, kerf (B): .135 (3.4mm), Plate (C): .095 (2.4mm), 610504C electro-blue carbide Tipped combination ripping and crosscut 10 inch dia X 50T 4+1, 15 deg, 5/8 bore, Non-Stick coated