Manual Lubricating Oil Pump, Double Outlet Port 500CC Left Right Hand Operated Lubrication Pump Metal Lubricating Oiler for CNC Punching Lathe Milling Cutting Machine Side Vertical Equipment
All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
Avoids Leakage: This hand lubricator oil pump uses high quality seals, lubrication pump for lathe machine is not easy to leak; High practicality, hand lubricating oil pump has small volume and double outlet port oiler is easy to install
Easy to Operate: Manual lubricating oil pump for punching is easy to be operated by pushing the handle down for oil feeding; The unit is equipped with reverse stopper that manual lubricating oil pump for cutting milling machine prevents the back flow of oil
Scope of Use: The manual lubricator oil pump can be combined with a throttling distributor to form a lubrication system, hand pump lubricator and milling machine oil pump is recommended to use oil viscosity N20~N1000
Convenient Lubricating Pump: Double outlet port for milling and CNC lubrication pump is a plunger structured manual pump; The double oil outlet for milling machine tool has a high pressure and a large diameter filler port, which is convenient to use
Wide Application: This lubricating manual oil pump and right hand operated lubrication oiler has a widely application during daily life, and cnc pump oiler can be applied in punching machine, grinding machine, milling machine, shearing machine, compound machine, cutting machine, weaving machine, etc
Description
Features:
1. Lubrication pump for cutting machine is made of high quality metal material, wear resistant
2. Double outlet port oiler pump and hand lubrication pump machine tool grinder is widely used in punching machine, lathe machine, cutting machine, milling machine
3. Double outlet port for punching machine pull the handle with your hand, the plunger is pushed and the oil in the cylinder is excluded; Release it, the plunger absorb the oil under the spring force
4. The hand lubrication for punching lathe can be combined with a throttling distributor to form a lubrication system, manual hand pump is recommended to use oil viscosity N20 N1000
5. Manual well pump use high quality seals, hand lubrication pump is not easy to leak
Specification:
Name: Manual Pump Hand
Pump material: Metal
Pump shaft position: side vertical
Impeller suction method: single suction
Drive mode: manual
Transmission medium: oil
Flow: 8m3/h
Discharge capacity: 8ml/min
Max.discharge pressure: 15kgf/cm²
Capacity: 500CC
Discharge port: two port(left & right)
Weight: 949g
