All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
20 Degree 0.1mm Carbide Engraving Bits
Router Tool For PCB Board
Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed. The bladed product is not use for people under 18 years. The item is only use for industrial /engraving, not hazardous article.
The shank diameter is about 3.175mm, which can be installed on the rotating tool when combined with 1/8 "collet
It is made of hard alloy, with high hardness, good heat resistance and not easy to wear.Even after continuous use for a long time, there will be no obvious signs of wear, and even the tip still feels very sharp.
It can be used to carve precise details, such as using these to carve copper-plated PVC board, which can remove fine lines on the surface of glass fiber printed circuit board and deal copper,engraving soft wood
Suggestion: The feed speed and spindle speed when processing PCB prototypes should start from low speed
R8 ER16 7/16 Inch Collet Chuck Holder CNC Milling Lathe R8 Arbor Spindle Tool Holder
KWD 16.500
UTRUSTTO Pattern Flush Trim Router Bits 1/4 Inch Shank, Bottom Bearing Flush Trim Router bit Set, Cutting Diameter: 1/2", Cutting Height Respectively 25/64", 3/4", 1", 1-1/2".
KWD 6.500
Whiteside Router Bits 1800 Cove Bit with 1/4-Inch Radius, 1-Inch Large Diameter 1/2-Inch Cutting Length
KWD 13
iCarbide CAT40 ER32 4 inch L ER COLLET CHUCK TOOL HOLDER G2.5 25000RPM (USA)
KWD 16.500
