Specifications:
Input: AC100-240V
Output: 10.8V/1.5A
Suitable for: Dremel 10.8V Battery
Package: 1x charger

Fit for: (Please search with "Ctrl+F" )
855-01 855-02 8000-01 8001-01

Charging steps:
1. Insert the battery into the charging stand of the charger
2. The charger indicator lights up red, indicating that it is charging.
3. The charger red light turns green and is always on, the battery is charged.
4. Remove the battery after charging, turn off the power
5. During the charging process, the charging cannot be interrupted for a short time.

Charging indication method:
1.Charger no load: bright green light
2.Battery reverse: 2Hz frequency flashing red light
3.The battery is bad: first, it lights up red and shows charging. After detecting for a while, it flashes at 2Hz.

Precautions:
1. Charger only charges Ni-MH, Ni-CD battery
2. Do not use the charger to charge the Li-ion battery and prohibit charging the non-rechargeable battery.
3. Check if the voltage and model of the battery match the charger before charging.
4. The connection between the charger hardware and the socket may cause an instant ignition, which is a normal phenomenon and can be used with confidence.
5. The charger is for indoor use only. It is forbidden to be placed in the rain or in the snow.
6. Prohibit non-professionals from opening the charger case