3/8inch(9.5mm) Hex Twist Step Drill Bit Set for Pocket Hole Drill Jig Guide Kit
Description:
Overall treatment of tool holder / high speed steel / high hardness and good wear resistance
The correct operation is as follows:
1. Adjust the bit height,
2. Clamp the boards you want to hit,
3. Put the drill into the hole and touch the board,
4. Raise the drill bit by 5mm (remember not to start the drill against the wood),
5. Start the electric drill to reach the speed of more than 500 rpm, and the recommended speed is 1500 rpm
6. Start to feed slowly, wait for half or all of the front-end fine drill to enter, then the feed can be accelerated
100% new and high quality
Material: HSS4241
Shank Type:Hex
Color: As the picture show
Size: Diameter：9.5mm,Length：160mm
Weight:10g
Quantity:2Set
Note:
Light shooting and different displays may causethe color of the item in the picture a little different from the real thing.The measurement allowed error is+/-1-3cm.
We highly appreciate all custome rsopinions to improvethe selling, also if anything you unsatisfied, please contact us for probable best solution. Thank you!
Package Included:
2Set 3/8inch(9.5mm) Hex Twist Step Drill Bit Set for Pocket Hole Drill Jig Guide Kit(If there are any problems with the product, please send us pictures.Tell us more details about this problem.)