All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
TP5 100 is a Double 8.4v single 4.2v lithium battery charge management lithium charging board; Input voltage: 5-18V DC power supply (actual 5-12V is appropriate)
Its ultra-small package and simple peripheral circuit make the TP5100 very suitable for the large-current charging management application of portable devices
TP5100 has built-in input overcurrent and undervoltage protection, chip over-temperature protection, short circuit protection, battery temperature monitoring, and battery reverse connection protection
TP5100 can charge the battery in three stages: trickle pre-charge, constant current and constant voltage, and the MAX charging current is up to 2A, red and green LED charge status indicator
TP5100 adopts an open working mode with a frequency of 400kHz, which enables it to use smaller peripheral devices, and still maintain a small heating capacity in large current charging
Description
Product details
Input voltage: 5-18V DC power supply (actual 5 - 12V is appropriate)
Charging status: full and empty blue light, red during charging
The voltage setting shall be operated in the state of power failure, and the additional switch shall also be switched after the input is disconnected
Set one single lithium drive and two double lithium drives
Interface description
+5~ 12V
Lithium battery+
Negative input
lithium battery
Solder short circuit: 2 lithium series 8.4V charging, which cannot be used in some cases
Red and blue status indicator: (full and empty blue light, charging process red light)
