Specification:
Drill Thickness: 10-180mm
Side Hole Diameter: 15mm
Direct Hole Diameter: 6/8/10mm
Slide Stroke: 5-90mm
Side Hole Stroke: 23-43mm
Weight: Approx. 1550g/54.7oz
Size: Shown as Picture

Package included:
1 * Extension Locator
9 * Drill Bushings (3pcs 6mm, 3pcs 8mm, 3pcs 10mm)
2 * Knurled Bolts
4 * Limit Ring (1pc 6mm, 1pc 8mm, 2pcs 10mm)
2 * Star Screws
1 * 15mm Tapper
3 * Drill Bits 6mm/8mm/10mm
1 * Hook Spanner
1 * Clamp Board
1 * Slider Set
1 * Main Board
2 * Washers 0.5/1mm
1 * Hex Wrench
1 * User Manual

Note:
Since the slider slides 2mm each time, it can only be aligned with the center of the plate of 10, 14, 18, 22mm, etc. If the thickness of your plate is not these thicknesses, it can't be aligned with the center to punch hole without adding washer.