Minder EDV Electronic Solenoid Valve Features: Built in strainer 1/4 turn ball valve Dual size inlet Large 4mm internal orifice Internal armature and shaft made from stainless steel Unique Mounting system Dual internal drain ports Ball valve used as manual tank or filter drain Solid state adjustable with test button Valve design allows for disassembly Specifications: Timer: Solid-state construction Status Indication: Power "ON" Valve"OPEN" Internal Time: 0.5 to 45 min. (as required) Discharge Time: 0.5 to 10 sec. (as required) Electrical Connection: DIN 46242 Connector: 4-position connector Coil: 110/115 volt AC(standard) Available 12 volt/24 volt DC, 220/230 volt AC for overseas installations Insulation: Class H 180°C (350°F) Protection: IP65 including connector Conforms to NEMA 4 std. Temperature Range: -20°C (-4F) to +150°C (300°F) Standard Voltages: 220/240V, 50Hz 115V, 60Hz Valve: 2-wy normally closed Pressure Range: 0 to 16 bar (230 psi g Temperature Range: Ambient: -10°C (14°F) to +50°C (120°F) Fluid: -10°C (14°F) to +140°C (285°F) Lubrication: Not required Strainer: Stainless steel screen ON/OFF control for self-cleaning Media: Air, gases, water, oil etc. Construction Materials: Tube/plunger - AISI 300/400 Spring - AISI 18/8 Body: Brass Seal Material: Buna Typical Installations: Compressor Source Receiver Outlet Filter Outlet The Moisture Minder is an automatic drain valve for your compressor system.Requires electricity and allows for multiple mounting options, the Moisture Minder is a truly universal solution for any air system. Failure to routinely drain your compressed air system can have catastrophic results. Eliminate the need to get down on your knees to let the water out of your air compressor tanks by installing the Moisture Minder