Pokin Urethane band saw tires are designed to fit any machine that requires a 1/2 inch 0.095 inch 9 inch bandsaw tire.

Compatible Models：
Black & Decker : BDBS100, BS700,
Craftsman : 137.21409, 113.24458, 315.214770, 315-214590
Delta : 28-150, BS100, SM400
Grizzly : G1052 ProTech: 3203
Ryobi : BS 101, BS901 .
Shopfox : W1749, W1750, T20837.
Fits certain models of Tradesman, Skil and Delta as well .
Compatible with any bandsaw requiring 9" x 1/2" x .095" tires
And is meant for Band Saw that requires a ½” wide by 3/32” thick tire.

Description :
Easy to install and remove. It is recommended to soak in hot water before installation to make the material more flexible.
When installing, please stretch the tire to fit the wheel tightly.
Replacing this tire increases the efficiency and effectiveness of the band saw while keeping it running smoothly and safely. Features a sturdy and impact-resistant profile for optimum durability.

Installation Steps ：
1. Make sure to unplug your band saw whilst changing any parts or servicing it.
2. Urethane band saw tires don't require adhesive, but they do need to be stretched on.
3. Remove the old tires, and clean the machine of any dirt, debris, or adhesive.
4. The tires can be fitted by stretching them on by hand.
5. If you can't get the tires on by hand stretching them, clamp the tires to the wheel. Work the tire around the wheel in both directions and add clamps as you go. Or soak it into hot water for a few minutes.
6. A dowel rod or smooth tool can be used to pry the tire on.
7. Once the tire is securely on the wheel, the stretch will need to be smoothed out.
8. With a dowel between the tire and the wheel, roll it around the en